Now available with new Cree XP-G3 s5 LEDs providing minimum of 172 lumen/watt @85degC
Custom PITLAMP
The PL Omni is the most sophisticated and effective mining lamp LED conversion available, with user programmable light settings up to 620 lumen. The spot and flood LEDs can be operated separately, or blended together, to best suit your individual needs.
Now available with new Cree XP-G3 s5 LEDs providing minimum of 172 lumen/watt, light temperature 5000K (neutral white).
£70
PL Omni Specification
- 4 regulated light settings (user configurable)
- 620 lumen maximum output (combined spot 310 lumen and flood 310 lumen)
- Twin high power s5 XP-G3 LEDs (172 lumen @ 350mA @ 85 degC) 5000k neutral tint
- Smooth spot optic for distant focus, and flood LED with efficient optic
- LEDs operated separately or blended together
- User defined power combinations to best suits your individual requirements
- Separate low power comfort LED (warm white), on independent circuit
- Super robust circuit architecture.
- Custom heat sink, and discreet thermal management
- Simple fitting, 3 screw terminal connections in Oldham or CEAG style lamps
- No power drain on batteries when lamp is switched off
- Progressive dimming at end of battery charge (will not just shut off when batteries are flat)
- 6.0v maximum input
Factory Setting | Spot LED | Flood LED | Output (estimated) | Duration (est. using 2500mAh |
1 (fixed) | - | 150mA | 73 lumen | 16 hours |
2 (programmable) | - | 350mA | 172 lumen | 7 hours |
3 (programmable) | 150mA | 350mA | 245 lumen | 5 hours |
4 (programmable) | 700mA | - | 310 lumen | 3.5 hours |
Secondary switch | - | 10mA | 5 lumen | includes battery |
Pitlamp Omni v5
For further information about performance and operaton, including how to program and configure settings, see PL Omni Operation
The regulated power settings levels for modules are given in mA. To determine the approximate regulated duration of light on your battery arrangement at a given power setting, simply divide the mAh capacity of your cell pack by the mA power draw at a given setting. For example, using 2100mAh NiMh low self discharge AA batteries at a power setting of 350mA will give a regulated duration in the region of 5-6 hours.
Suitable for lamps that run from 3.0 volts to 6.0 volts (maximum), typically a 3 or 4 cell Nimh battery configuration, or parallel wired 3.7 li-ion cells. This includes Speleo Technics Headlites and FX3s, and lead acid mining lamps. Not suitable for 2.4v 2 series cell lamps such as FX2, 5 cell 6v+ lamps such as FX5, or series wired li-ion packs of 7.4v or higher.