To switch between the settings, use the down switch on the Petzl Duo. Switch on-off-on-off to move between settings 1-2-3-4 ... 1-2 etc, in a looping sequence. Setting 1 will blink momentarily when selected to make it very easy to determine exactly which setting has been selected.
The v42 can be programmed using Customduo infrared remote control (optional). From 1-9 light settings can be specified, and the level of light provided by the spot and/or flood LEDs for each setting can be configured by the user.
The spot and flood LEDs can be operated separately or blended together. Each LED can be operated at low, medium, medium plus, high and maximum, offering a choice from 24 possible light combinations.
For further information about operaton and performance, including how to program and configure settings, see v42 Operation
The v42 is the latest version of our widely acclaimed Duo Omni module, simply the most effective LED conversion for the Petzl Duo, with optional user programmable light settings. The spot and flood LEDs can be operated separately, or blended together, to to best suit your individual needs.
sale £60 (was £70) (remote control optional +£2.50)
Operating the switch very quickly, on-off-on ('double switch') will turn on low power side smd LED. At this point, the main LED will blink 1 to 5 times to indicate the approximate level of battery charge. This is visible without removing helmet for maximum convenience.
The v42 has two main LEDs. A focused spot LED and a wide angle flood LED with optic. In normal operation the v42 has four factory default power settings (see following table). The v42 also has a separate side LED (white smd LED) for maximum run time, and battery charge level indication visible without removing helmet.
The factory default light settings are;
see Operation chart including light output and indicative run times
(est. 2500mAh eneloops)
1 (low flood)
2 (high spot)
3 (medium flood)